Probleme nach upgrade

Du kommst mit der Installation nicht voran oder willst noch was nachfragen? Schau auch in den "Tipps und Tricks"-Bereich.
Antworten
reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 14:26:13

Hallo,
bin neu hier. Bin über die Googlesuche ein paar mal auf das Forum gestoßen da einige ähnliche Probleme hier auftauchten. Hoffe ich schreibe in das richtige Forum. Zu updates gibt es hier keine Rubrik.
Habe mir vermutlich mein Debian zerschossen nachdem ich versuchte von Lenny über Sqeeze auf die aktuelle Version zu upgraden. Anscheinend fehlen mit da Pakete.bzw. Verknüpfungen.
Jetzt startet der Apache nicht.
id argument: alloc_listener: failed to get a socket for (null)
Syntax error on line 9 of /etc/apache2/ports.conf:
Listen setup failed
Action 'start' failed.
The Apache error log may have more information.
failed!
in ports.conf
steht
# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz

NameVirtualHost *:80
Listen 80

<IfModule mod_ssl.c>
# SSL name based virtual hosts are not yet supported, therefore no
# NameVirtualHost statement here
Listen 443
</IfModule>
das sollte wohl richtig sein. Bin jetzt nicht gerade der Linuxcrack.Mal sehen ob ich hier weiter komme.

nach einem atp-get upgrade kommt
apt:~# apt-get upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
courier-authdaemon courier-authlib-mysql courier-imap courier-imap-ssl
courier-pop-ssl
5 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
201 nicht vollständig installiert oder entfernt.
Es müssen noch 0 B von 370 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.375 kB Plattenplatz freigegeben.
Möchten Sie fortfahren [J/n]?
Wie komme ich an die 201 anderen?
sources.list ist angepaßt

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 14:49:36

Bist du mit apt-get upgrade von Lenny nach Squeeze gekommen und auch von Squeeze nach Wheezy?
Falls ja würde ich vorschlagen du spielst deine Sicherung ein und machst das ganze nochmal mit apt-get dist-upgrade.*
Falls du keine Sicherung hast oder du mutig bist kannst du probieren, ob ein dist-upgrade auf dem aktuellen System zu einem konsistenten Zustand führt. Ausgang ungewiss.
Falls du bisher auch dist-upgrades gemacht hast müsstest du deine Situation genauer beschreiben.

*) Release-Wechsel bitte immer mit dist-upgrade machen! Falls du mal in die Situation kommst: Unter Testing/Unstable wäre jedes Update ein potenzieller Release-Wechsel.

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 15:13:53

Zuerst war Lenny drauf. Dann wollte ich eigentlich nur php updaten. Da ging was schief. Dann habe ich über sqeeze zu wheezy geupdatet. Unter squeeze (wer denkt sich bloß solche namen aus:-) lief apache und Mysql noch.
anleitung dazu habe ich diese benutzt http://www.sysadminslife.com/linux/debi ... s-apt-get/
und die weiteren. Sicherung habe ich leider keine weil der Backupspace meines Anbieters irgendwie nicht funktioniert oder ich zu blöd bin.
Kann man nicht einfach eine Standardkonfiguration einspielen wie bei anderen Systemen ohne gleich alle Daten zu verlieren. Webs sind alle da und Datenbanken auch nur komme ich ohne Apache nicht ran. Die Webs kann ich via Winscp sichern. Von den DBs habe ich ein paar Backups, allerdings nicht ganz aktuell.
Komme zwar mit der Konsole (putty) einigermaßen klar. Hätte ich bloß kein update versucht ;-(
Lief alles gut und Einbrüche hatte ich nie. Jetzt einen Totalschaden.
Mit winscp ist eigentlich alles da, irgendwie hat er Probleme mit den Befehlen die Standardpakete zu installieren.
.
Zuletzt geändert von reblaus1 am 07.04.2015 15:27:40, insgesamt 1-mal geändert.

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 15:27:29

reblaus1 hat geschrieben:Zuerst war Lenny drauf. Dann wollte ich eigentlich nur php updaten. Da ging was schief. Dann habe ich über sqeeze zu wheezy geupdatet. Unter squeeze (wer denkt sich bloß solche namen aus:-) lief apache und Mysql noch.
anleitung dazu habe ich diese benutzt http://www.sysadminslife.com/linux/debi ... s-apt-get/
Die Anleitung sagt gar nichts zum Releasewechsel, sonden nur wie man den alten Lenny-Schinken weiterbetreiben kann.

Wie bist du nun also von Lenny nach Squeeze gekommen? Mit apt-get upgrade oder mit apt-get dist-upgrade? Die gleiche Frage gilt für den Squeeze-Wheezy-Wechsel.
Außerdem zeig mal bitte den Inhalt deiner sources.list!
reblaus1 hat geschrieben:Kann man nicht einfach eine Standardkonfiguration einspielen wie bei anderen Systemen ohne gleich alle Daten zu verlieren.
Das musst du mit deinem Anbieter klären.
reblaus1 hat geschrieben:Einbrüche hatte ich nie.
Woher weißt du das?

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 15:32:29

deb http://ftp.at.debian.org/debian/ wheezy main
deb-src http://ftp.at.debian.org/debian/ wheezy main

deb http://security.debian.org/ wheezy/updates main
deb-src http://security.debian.org/ wheezy/updates main

deb http://ftp.at.debian.org/debian/ wheezy-updates main
deb-src http://ftp.at.debian.org/debian/ wheezy-updates main
sowohl uprade wie auch dist-upgrade
http://www.sysadminslife.com/linux/howt ... -7-wheezy/

Einbrüche hätte ich in den logs sicher gesehen. Und wenn was gewesen wäre hätte sich der Hoster garantiert gemeldet :-) Dosattacken gab es wohl.

Ich verstehe nicht warum einfach Pakete ausgelassen werden und nicht einfach drüber installiert. Dann sollte doch alles wieder halbwegs laufen.
Zuletzt geändert von reblaus1 am 07.04.2015 15:39:12, insgesamt 1-mal geändert.

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 15:39:04

Und was passiert jetzt wenn du ein dist-upgrade absetzt?

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 15:41:26

OJE
ziemlich lang sorry.

Code: Alles auswählen

r  7 15:21:47 apt postfix/smtpd[10209]: disconnect from mail-qc0-f200.google.com[209.85.216.200]
apt:~# apt-get dist-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
  courier-authdaemon courier-authlib-mysql courier-imap courier-imap-ssl
  courier-pop-ssl
5 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
201 nicht vollständig installiert oder entfernt.
Es müssen noch 0 B von 370 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.375 kB Plattenplatz freigegeben.
Möchten Sie fortfahren [J/n]? j
Lese Changelogs... Fertig
(Lese Datenbank ... 100388 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von courier-authdaemon 0.61.0-1+lenny1 (durch .../courier-authdaemon_0.63.0-6+b1_amd64.deb) ...
[....] Stopping Courier authentication services: authdaemond/var/run/courier/authdaemon/pid.lock: No such file or directory
invoke-rc.d: initscript courier-authdaemon, action "stop" failed.
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
[....] Stopping Courier authentication services: authdaemond/var/run/courier/authdaemon/pid.lock: No such file or directory
invoke-rc.d: initscript courier-authdaemon, action "stop" failed.
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/courier-authdaemon_0.63.0-6+b1_amd64.deb (--unpack):
 Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
insserv: warning: script 'K20mydns' missing LSB tags and overrides
insserv: warning: script 'mydns' missing LSB tags and overrides
insserv: There is a loop at service stop-bootlogd if started
insserv: There is a loop between service rmnologin and mountall if started
insserv:  loop involving service mountall at depth 4
insserv:  loop involving service checkfs at depth 3
insserv:  loop involving service quota at depth 6
insserv: There is a loop between service rmnologin and mountnfs if started
insserv:  loop involving service mountnfs at depth 8
insserv:  loop involving service networking at depth 7
insserv:  loop involving service urandom at depth 6
insserv: There is a loop between service stop-bootlogd and mountdevsubfs if started
insserv:  loop involving service mountdevsubfs at depth 2
insserv:  loop involving service udev at depth 1
insserv:  loop involving service mountnfs-bootclean at depth 8
insserv: There is a loop at service rmnologin if started
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service postfix at depth 2
insserv: There is a loop between service rmnologin and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 8
insserv: There is a loop between service stop-bootlogd and udev if started
insserv:  loop involving service mountkernfs at depth 1
insserv:  loop involving service stop-bootlogd at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: Fehler beim Aufräumen:
 Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Vorbereitung zum Ersetzen von courier-pop-ssl 0.60.0-2 (durch .../courier-pop-ssl_0.68.2-1_amd64.deb) ...
Stopping Courier POP3-SSL server:/var/run/courier/pop3d-ssl.pid.lock: No such file or directory
invoke-rc.d: initscript courier-pop-ssl, action "stop" failed.
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
Stopping Courier POP3-SSL server:/var/run/courier/pop3d-ssl.pid.lock: No such file or directory
invoke-rc.d: initscript courier-pop-ssl, action "stop" failed.
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/courier-pop-ssl_0.68.2-1_amd64.deb (--unpack):
 Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
insserv: warning: script 'K20mydns' missing LSB tags and overrides
insserv: warning: script 'mydns' missing LSB tags and overrides
insserv: There is a loop at service stop-bootlogd if started
insserv: There is a loop between service rmnologin and mountall if started
insserv:  loop involving service mountall at depth 4
insserv:  loop involving service checkfs at depth 3
insserv:  loop involving service quota at depth 6
insserv: There is a loop between service rmnologin and mountnfs if started
insserv:  loop involving service mountnfs at depth 8
insserv:  loop involving service networking at depth 7
insserv:  loop involving service urandom at depth 6
insserv: There is a loop between service stop-bootlogd and mountdevsubfs if started
insserv:  loop involving service mountdevsubfs at depth 2
insserv:  loop involving service udev at depth 1
insserv:  loop involving service mountnfs-bootclean at depth 8
insserv: There is a loop at service rmnologin if started
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service postfix at depth 2
insserv: There is a loop between service rmnologin and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 8
insserv: There is a loop between service stop-bootlogd and udev if started
insserv:  loop involving service mountkernfs at depth 1
insserv:  loop involving service stop-bootlogd at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: Fehler beim Aufräumen:
 Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Vorbereitung zum Ersetzen von courier-imap 4.4.0-2 (durch .../courier-imap_4.10.0-20120615-1_amd64.deb) ...
Stopping Courier IMAP server:/var/run/courier/imapd.pid.lock: No such file or directory
invoke-rc.d: initscript courier-imap, action "stop" failed.
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
Stopping Courier IMAP server:/var/run/courier/imapd.pid.lock: No such file or directory
invoke-rc.d: initscript courier-imap, action "stop" failed.
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/courier-imap_4.10.0-20120615-1_amd64.deb (--unpack):
 Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
insserv: warning: script 'K20mydns' missing LSB tags and overrides
insserv: warning: script 'mydns' missing LSB tags and overrides
insserv: There is a loop at service stop-bootlogd if started
insserv: There is a loop between service rmnologin and mountall if started
insserv:  loop involving service mountall at depth 4
insserv:  loop involving service checkfs at depth 3
insserv:  loop involving service quota at depth 6
insserv: There is a loop between service rmnologin and mountnfs if started
insserv:  loop involving service mountnfs at depth 8
insserv:  loop involving service networking at depth 7
insserv:  loop involving service urandom at depth 6
insserv: There is a loop between service stop-bootlogd and mountdevsubfs if started
insserv:  loop involving service mountdevsubfs at depth 2
insserv:  loop involving service udev at depth 1
insserv:  loop involving service mountnfs-bootclean at depth 8
insserv: There is a loop at service rmnologin if started
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service postfix at depth 2
insserv: There is a loop between service rmnologin and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 8
insserv: There is a loop between service stop-bootlogd and udev if started
insserv:  loop involving service mountkernfs at depth 1
insserv:  loop involving service stop-bootlogd at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: Fehler beim Aufräumen:
 Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Vorbereitung zum Ersetzen von courier-imap-ssl 4.4.0-2 (durch .../courier-imap-ssl_4.10.0-20120615-1_amd64.deb) ...
Stopping Courier IMAP-SSL server:/var/run/courier/imapd-ssl.pid.lock: No such file or directory
invoke-rc.d: initscript courier-imap-ssl, action "stop" failed.
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
Stopping Courier IMAP-SSL server:/var/run/courier/imapd-ssl.pid.lock: No such file or directory
invoke-rc.d: initscript courier-imap-ssl, action "stop" failed.
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/courier-imap-ssl_4.10.0-20120615-1_amd64.deb (--unpack):
 Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
insserv: warning: script 'K20mydns' missing LSB tags and overrides
insserv: warning: script 'mydns' missing LSB tags and overrides
insserv: There is a loop at service stop-bootlogd if started
insserv: There is a loop between service rmnologin and mountall if started
insserv:  loop involving service mountall at depth 4
insserv:  loop involving service checkfs at depth 3
insserv:  loop involving service quota at depth 6
insserv: There is a loop between service rmnologin and mountnfs if started
insserv:  loop involving service mountnfs at depth 8
insserv:  loop involving service networking at depth 7
insserv:  loop involving service urandom at depth 6
insserv: There is a loop between service stop-bootlogd and mountdevsubfs if started
insserv:  loop involving service mountdevsubfs at depth 2
insserv:  loop involving service udev at depth 1
insserv:  loop involving service mountnfs-bootclean at depth 8
insserv: There is a loop at service rmnologin if started
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Starting stop-bootlogd depends on rmnologin and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service postfix at depth 2
insserv: There is a loop between service rmnologin and mountall-bootclean if started
insserv:  loop involving service mountall-bootclean at depth 8
insserv: There is a loop between service stop-bootlogd and udev if started
insserv:  loop involving service mountkernfs at depth 1
insserv:  loop involving service stop-bootlogd at depth 1
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: Fehler beim Aufräumen:
 Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Vorbereitung zum Ersetzen von courier-authlib-mysql 0.61.0-1+lenny1 (durch .../courier-authlib-mysql_0.63.0-6+b1_amd64.deb) ...
/var/run/courier/authdaemon/pid.lock: No such file or directory
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
/var/run/courier/authdaemon/pid.lock: No such file or directory
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/courier-authlib-mysql_0.63.0-6+b1_amd64.deb (--unpack):
 Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
Fehler traten auf beim Bearbeiten von:
 /var/cache/apt/archives/courier-authdaemon_0.63.0-6+b1_amd64.deb
 /var/cache/apt/archives/courier-pop-ssl_0.68.2-1_amd64.deb
 /var/cache/apt/archives/courier-imap_4.10.0-20120615-1_amd64.deb
 /var/cache/apt/archives/courier-imap-ssl_4.10.0-20120615-1_amd64.deb
 /var/cache/apt/archives/courier-authlib-mysql_0.63.0-6+b1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
apt:~#

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 15:52:10

Ne Menge Fehler.
8O

ein dpkg --audit
liefert mir

Code: Alles auswählen

Die folgenden Pakete befinden sich durch schwere Probleme bei der Installation
in einem Schlamassel. Sie müssen neu installiert werden, damit sie
(und alle von ihnen abhängende Pakete) ordnungsgemäß funktionieren:
 courier-authdaemon   Courier authentication daemon
 courier-imap-ssl     Courier mail server - IMAP over SSL
 courier-imap         Courier mail server - IMAP server
 courier-pop-ssl      Courier mail server - POP3 over SSL

Die folgenden Pakete wurden entpackt, aber noch nicht konfiguriert.
Sie müssen mit dpkg --configure oder dem Konfigurations-Menüeintrag in
dselect konfiguriert werden, damit sie ordnungsgemäß funktionieren:
 prosper              LaTeX class for writing transparencies
 linux-image-3.2.0-4-rt-amd64 Linux 3.2 for 64-bit PCs, PREEMPT_RT
 mcrypt               Replacement for old unix crypt(1)
 libmagickcore3       low-level image manipulation library
 libt1-5              Type 1 font rasterizer library - runtime
 libxml-parser-perl   Perl module for parsing XML files
 makedev              creates device files in /dev
 laptop-detect        attempt to detect a laptop
 texlive-base         TeX Live: Essential programs and files
 linux-image-3.2.0-4-rt-amd64-dbg Debugging symbols for Linux 3.2.0-4-rt-amd64
 module-init-tools    transitional dummy package (module-init-tools to kmod)
 squirrelmail         Webmail for nuts
 libhtml-format-perl  module for transforming HTML into various formats
 libtie-ixhash-perl   ordered associative arrays for Perl
 texlive-luatex       TeX Live: LuaTeX packages
 tk8.4                Tk toolkit for Tcl and X11, v8.4 - run-time files
 libpathplan4         rich set of graph drawing tools - pathplan library
 linux-image-2.6-amd64 Linux for 64-bit PCs (dummy package)
 fontconfig           generic font configuration library - support binaries
 mlock                mailbox locking program
 texlive-generic-recommended TeX Live: Recommended generic packages
 libtool              Generic library support script
 tcl8.4               Tcl (the Tool Command Language) v8.4 - run-time files
 libnet-ident-perl    Perl module to lookup the username on the remote end of a
 libauthen-sasl-perl  Authen::SASL - SASL Authentication framework
 texlive-pstricks-doc TeX Live: Documentation files for texlive-pstricks
 lftp                 Sophisticated command-line FTP/HTTP client programs
 texlive-fonts-recommended TeX Live: Recommended fonts
 hicolor-icon-theme   default fallback theme for FreeDesktop.org icon themes
 latex-xcolor         Easy driver-independent TeX class for color
 texlive-pictures     TeX Live: Graphics packages and programs
 zoo                  manipulate zoo archives
 libfile-basedir-perl Perl module to use the freedesktop basedir specification
 lsb-release          Linux Standard Base version reporting utility
 ssl-cert             simple debconf wrapper for OpenSSL
 libconvert-asn1-perl Perl module for encoding and decoding ASN.1 data structur
 xfsprogs             Utilities for managing the XFS filesystem
 libglib2.0-data      Common files for GLib library
 libutempter0         A privileged helper for utmp/wtmp updates (runtime)
 getmail4             mail retriever with support for POP3, IMAP4 and SDPS
 libmagickcore5-extra:amd64 low-level image manipulation library - extra codecs
 linux-image-3.2.0-4-amd64 Linux 3.2 for 64-bit PCs
 grub-common          GRand Unified Bootloader (common files)
 libmagickcore3-extra low-level image manipulation library - extra codecs
 texlive-pictures-doc TeX Live: Documentation files for texlive-pictures
 libnet-ldap-perl     client interface to LDAP servers
 grub-pc-bin          GRand Unified Bootloader, version 2 (PC/BIOS binaries)
 xterm                X terminal emulator
 libjs-mootools       compact JavaScript framework
 libmagickwand3       image manipulation library
 dhcp3-client         ISC DHCP server (transitional package)
 mbr                  Master Boot Record for IBM-PC compatible computers.
 libmath-bigint-perl  arbitrary size integer/float math package
 libfile-mimeinfo-perl Perl module to determine file types
 linux-libc-dev:amd64 Linux support headers for userspace development
 clamav               anti-virus utility for Unix - command-line interface
 libgsf-1-114         Structured File Library - runtime version
 gcc-4.6              GNU C compiler
 openbsd-inetd        OpenBSD Internet Superserver
 pgf                  TeX Portable Graphic Format
 libcdt4              rich set of graph drawing tools - cdt library
 texlive-binaries     Binaries for TeX Live
 os-prober            utility to detect other OSes on a set of drives
 javascript-common    Base support for javascript library packages
 libtommath0          multiple-precision integer library [runtime]
 grub                 GRand Unified Bootloader (dummy package)
 quota                disk quota management tools
 php-pear             PEAR - PHP Extension and Application Repository
 texlive-latex-recommended-doc TeX Live: Documentation files for texlive-latex-
 vim                  Vi IMproved - enhanced vi editor
 rsync                fast, versatile, remote (and local) file-copying tool
 linux-headers-3.2.0-4-amd64 Header files for Linux 3.2.0-4-amd64
 logrotate            Log rotation utility
 linux-image-2.6.26-2-amd64 Linux 2.6.26 image on AMD64
 libgsf-1-common      Structured File Library - common files
 texlive-latex-recommended TeX Live: LaTeX recommended packages
 libx11-protocol-perl Perl module for the X Window System Protocol, version 11
 doxygen-latex        Documentation system for C, C++, Java, Python and other l
 squirrelmail-locales Translations for the SquirrelMail Webmail package
 ruby1.9.1            Interpreter of object-oriented scripting language Ruby
 usbutils             Linux USB utilities
 texlive-pstricks     TeX Live: PSTricks packages
 libgraph4            rich set of graph drawing tools - graph library
 gs-common            Dummy package depending on ghostscript
 mysql-client         MySQL database client (metapackage depending on the lates
 exiv2                EXIF/IPTC metadata manipulation tool
 courier-ssl          Courier mail server - SSL/TLS Support
 clamav-freshclam     anti-virus utility for Unix - virus database update utili
 apache2-mpm-prefork  Apache HTTP Server - traditional non-threaded model
 postfix-doc          Documentation for Postfix
 vlogger              virtual web logfile rotater/parser
 x11-utils            X11 utilities
 libsqlite0           SQLite shared library
 consolekit           framework for defining and tracking users, sessions and s
 libnetpbm10          Graphics conversion tools shared libraries
 clamav-base          anti-virus utility for Unix - base package
 tipa                 system for processing phonetic symbols in LaTeX
 texlive-latex-base   TeX Live: Basic LaTeX packages
 courier-pop          Courier mail server - POP3 server
 php-auth             PHP PEAR modules for creating an authentication system
 libnet-daemon-perl   Perl module for building portable Perl daemons easily
 ruby                 Interpreter of object-oriented scripting language Ruby (d
 libxmu6:amd64        X11 miscellaneous utility library
 acpid                Advanced Configuration and Power Interface event daemon
 ps2eps               convert PostScript to EPS (Encapsulated PostScript) files
 x11-xserver-utils    X server utilities
 libxaw7:amd64        X11 Athena Widget library
 libmysqlclient16     MySQL database client library
 libmail-spf-perl     Perl implementation of Sender Policy Framework and Sender
 texlive-fonts-recommended-doc TeX Live: Documentation files for texlive-fonts-
 latex-beamer         LaTeX class to produce presentations
 apache2-suexec       Standard suexec program for Apache 2 mod_suexec
 texlive-font-utils   TeX Live: Graphics and font utilities
 texlive-latex-base-doc TeX Live: Documentation files for texlive-latex-base
 apache2              Apache HTTP Server metapackage
 libhtml-template-perl module for using HTML templates with Perl
 ienglish-common      Common files for British and American ispell dictionaries
 iamerican            American English dictionary for ispell (standard version)
 nomarch              Unpacks .ARC and .ARK MS-DOS archives
 libruby1.9.1         Libraries necessary to run Ruby 1.9.1
 texlive-latex-extra  TeX Live: LaTeX supplementary packages
 xfonts-encodings     Encodings for X.Org fonts
 ispell               International Ispell (an interactive spelling corrector)
 firmware-linux-free  Binary firmware for various drivers in the Linux kernel
 ufraw-batch          batch importer for raw camera images
 libexiv2-9           EXIF/IPTC metadata manipulation library
 acpi-support-base    scripts for handling base ACPI events such as the power b
 libfile-desktopentry-perl Perl module to handle freedesktop .desktop files
 unhide               Forensic tool to find hidden processes and ports
 grub-pc              GRand Unified Bootloader, version 2 (PC/BIOS version)
 phpmyadmin           MySQL web administration tool
 texlive-extra-utils  TeX Live: TeX auxiliary programs
 ttf-marvosym         Symbol font for school and office
 pure-ftpd-mysql      Secure and efficient FTP server with MySQL user authentic
 xbitmaps             Base X bitmaps
 linux-image-amd64    Linux for 64-bit PCs (meta-package)
 eject                ejects CDs and operates CD-Changers under Linux
 libmcrypt4           De-/Encryption Library
 courier-maildrop     Courier mail server - mail delivery agent
 libgvc5              rich set of graph drawing tools - gvc library
 libpam-mysql         PAM module allowing authentication from a MySQL server
 apache2.2-common     Apache HTTP Server common files
 unzip                De-archiver for .zip files
 libexiv2-12          EXIF/IPTC metadata manipulation library
 liblensfun0          Lens Correction library - Runtime files
 libmhash2            Library for cryptographic hashing and message authenticat
 xml-core             XML infrastructure and XML catalog file support
 libmail-sendmail-perl Send email from a perl script
 imagemagick          image manipulation programs
 libxtst6:amd64       X11 Testing -- Record extension library
 lmodern              scalable PostScript and OpenType fonts based on Computer
 libapache2-mod-fcgid an alternative module compat with mod_fastcgi
 libice6:amd64        X11 Inter-Client Exchange library
 libx11-data          X11 client-side library
 libsm6:amd64         X11 Session Management library
 squirrelmail-viewashtml SquirrelMail plugin: View mails as HTML
 dhcp3-common         ISC DHCP common files (transitional package)
 linux-headers-3.2.0-4-common Common header files for Linux 3.2.0-4
 libpam-ck-connector:amd64 ConsoleKit PAM module
 php5                 server-side, HTML-embedded scripting language (metapackag
 libxdot4             rich set of graph drawing tools - xdot library
 grub2-common         GRand Unified Bootloader (common files for version 2)
 linux-kbuild-3.2     Kbuild infrastructure for Linux 3.2
 udev                 /dev/ and hotplug management daemon
 libxml-xpathengine-perl re-usable XPath engine for DOM-like trees
 fail2ban             ban hosts that cause multiple authentication errors
 libxml-twig-perl     Perl module for processing huge XML documents in tree mod
 libapache2-mod-suphp Apache2 module to run PHP scripts with the owner permissi
 clamav-daemon        anti-virus utility for Unix - scanner daemon
 liblensfun-data      Lens Correction library - Data
 tex-gyre             scalable PostScript and OpenType fonts based on URW Fonts
 netpbm               Graphics conversion tools between image formats
 xfonts-utils         X Window System font utility programs
 installation-report  system installation report
 zip                  Archiver for .zip files
 uuid-dev             universally unique id library - headers and static librar
 mysql-server         MySQL database server (metapackage depending on the lates
 texlive-latex-extra-doc TeX Live: Documentation files for texlive-latex-extra
 libnet-dbus-perl     Extension for the DBus bindings
 libxt6:amd64         X11 toolkit intrinsics library
 pure-ftpd-common     Pure-FTPd FTP server (Common Files)
 quotatool            tool to edit disk quotas from the command line
 courier-base         Courier mail server - base system
 suphp-common         Common files for mod suphp
 spamc                Client for SpamAssassin spam filtering daemon
 wwwconfig-common     Debian web auto configuration

Die folgenden Pakete sind nur halb konfiguriert, wahrscheinlich durch
Probleme während der ersten Konfiguration. Die Konfiguration sollte mit
dpkg --configure <Paket> oder mit dem Konfigurations-Menüeintrag in
dselect erneut versucht werden:
 initramfs-tools      generic modular initramfs generator
 procps               /proc file system utilities
 cpufrequtils         utilities to deal with the cpufreq Linux kernel feature
 kmod                 tools for managing Linux kernel modules
 dbus                 simple interprocess messaging system (daemon and utilitie
 ntp                  Network Time Protocol daemon and utility programs
 x11-common           X Window System (X.Org) infrastructure
 spamassassin         Perl-based spam filter using text analysis
 mysql-server-5.5     MySQL database server binaries and system database setup
 amavisd-new          Interface between MTA and virus scanner/content filters
 cron                 process scheduling daemon

Für die folgenden Pakete fehlt die MD5-Prüfsummen-Datei in der Datenbank,
sie müssen erneut installiert werden:
 g++                  GNU C++ compiler
 libdb4.5             Berkeley v4.5 Database Libraries [runtime]
 binutils             GNU assembler, linker and binary utilities
Zuletzt geändert von reblaus1 am 07.04.2015 15:59:47, insgesamt 1-mal geändert.

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 15:52:57

Alle Pakete die ich da identifizieren kann sind älter als Squeeze, kommen also vermutlich aus Lenny (nicht geprüft). Da kann kein sauberes dist-upgrade audf Squeeze stattgefunden haben. Die Frage wäre jetzt, ob überhaupt ein dist-upgrade stattfand.

Trag mal bitte die Lenny-Archivquellen, und zwar nur die, in deine sources.list ein! Dann machst du ein dist-upgrade und postest die Ausgabe.
Lange Outputs kannst du nach Nopaste schieben:
pastebin.php

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 16:12:51

apt:~# apt-get dist-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Das Paket courier-imap-ssl muss neu installiert werden, es kann jedoch kein Archiv dafür gefunden werden.


das ist alles. in der list eingetragen ist

Code: Alles auswählen

deb http://ftp.de.debian.org/debian-archive/debian/ lenny main
deb-src http://ftp.de.debian.org/debian-archive/debian/ lenny main
Übrigens danke für die Hilfe. Ich hoffe ich kann Dir auch mal einen Stein in den Garten werfen. :THX:

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 16:19:35

Das Paket ist im Archiv vorhanden. [1]
Hast du vor dem dist-upgrade apt-get update gemacht?


[1] http://ftp.de.debian.org/debian-archive ... c/courier/

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 16:58:45

http://nopaste.debianforum.de/38440

Hoffe hab das richtig gemacht.

Benutzeravatar
hikaru
Moderator
Beiträge: 13968
Registriert: 09.04.2008 12:48:59

Re: Probleme nach upgrade

Beitrag von hikaru » 07.04.2015 17:33:03

Das ist ein heilloses Durcheinander. Da wird u.a. versucht einen Wheezy-Kernel über einen Lenny-Kernel zu installieren. Ich geb's auf.

Sichere deine Daten und fang von vorne an! Aber mach bitte vorher einen Crashkurs zum Thema Serverbetreuung! So ein öffentlich zugänglicher Server ist kein Spielzeug.
Ich würde mir den sicheren Betrieb mit meinem aktuellen Wissen nicht zutrauen.

reblaus1
Beiträge: 12
Registriert: 07.04.2015 14:16:13

Re: Probleme nach upgrade

Beitrag von reblaus1 » 07.04.2015 17:39:04

die mysql daten waren weg bis ich gemerkt habe das er eine partition nicht gemounted hat. warum auch immer. Sind allerdings binärdateien.

Antworten